• Excrubulent@slrpnk.net
    link
    fedilink
    English
    arrow-up
    0
    ·
    edit-2
    8 months ago

    I just ordered a dryer that may have to go on top of my dishwasher which is on top of my washing machine - hard to explain why except to say there was no good place for the washing machine dishwasher in the kitchen.

    If that happens, I’ll be able to reach the clothes, but the control panel will be a bit of a stretch. In that case wifi control could be clutch.

    Edit: my brain can never sort those two out.

    Also I understand this is not the intended use case, I just think it’s funny.

      • Excrubulent@slrpnk.net
        link
        fedilink
        English
        arrow-up
        0
        ·
        edit-2
        8 months ago

        There’s no dedicated spot for a dishwasher under any of the benches, and to get a hose out from the sink would need holes drilled that I’m not prepared to do because it’s a rental. Also, all the wall area is spoken for, and there are doors immediately next to the kitchen on both sides. One of those doors is the laundry, so I just stuck it in there. It’s a small laundry though, so there’s no space side by side for anything. If the triple stack doesn’t work, the dryer can go on the opposite side of the kitchen under or over my small freezer, since it doesn’t need water. That’s where my dishwasher would’ve gone if not for the hoses that would’ve needed to go across the floor.

        • Riskable@programming.dev
          link
          fedilink
          English
          arrow-up
          1
          ·
          8 months ago

          If you’re putting in a dishwasher just drill the holes. Your landlord will thank you for saving them the trouble of having to do that themselves some day.

          I don’t think any normal landlord would give two shits about some dishwasher-hose-sized holes drilled under a sink, between internal cabinet walls, that no one will ever see. Such holes are so far back and out of the way… No one would ever notice unless they’re missing.

          • Excrubulent@slrpnk.net
            link
            fedilink
            English
            arrow-up
            1
            ·
            8 months ago

            Those aren’t the holes I’m talking about, I would drill those in a second. I’ve done it before.

            There’s enough information in my post to explain why it’s not as simple as you seem to think, plus the other issues with doing it this way, and I can unpack it for you, but I’d need you to tell me you were interested in the information first.

        • dogslayeggs@lemmy.world
          link
          fedilink
          English
          arrow-up
          0
          ·
          8 months ago

          I don’t know if the stack will work, unless you have tall ceilings. Standard dishwasher is 3ft, a miniature dryer is 2ft, and a miniature washing machine is 2ft. That’s 8ft without stacking hardware, and standard ceilings are 8ft 2in.

          • Excrubulent@slrpnk.net
            link
            fedilink
            English
            arrow-up
            0
            ·
            8 months ago

            Before I spent hundreds of dollars on a dryer I did measure the space. Also, “standard” ceilings where? Given you didn’t specify, I’d assume you mean in the US.

            • dogslayeggs@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              8 months ago

              In the US, the standard size ceiling is due to the length and width of 2x4s. 8ft 2in is an 8ft 2x4 plus the top and bottom plate minus the flooring and ceiling drywall. In newer and more expensive houses, 9ft is starting to become more common as people are spending more and more on building.